spur gear
美 
英
- na.【机】正齿轮
- 网络直齿圆柱齿轮；直齿轮；直齿齿轮
英汉解释
英英解释
例句
A gear having tooth elements that are straight and parallel to its axis is known as a spur gear .
一个齿轮齿后，常常被认为是直与平行其主轴是众所周知的是一个齿轮等。
The high frequency induction hardening can't raise the surface microhardness of the cold precision forging spur gear.
高频感应淬火不能达到硬化冷精锻直齿圆柱齿轮齿面的目的。
A gear have tooth elements that are straight and parallel to its axis is known as a spur gear.
一个齿轮有蛀牙的要素，它笔直平行轴是众所周知的齿轮。
Precision forging of spur gear is an important process used for manufacturing complex high-quality components.
直齿圆柱齿轮精锻成形是一种高精度的复杂成形工艺。
Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.
如果采用正齿轮（SGA）或复合伞齿轮（BGA）附件，则可以在图1中显示的各个位置安装手轮。
Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.
部分转子泵采用的是简单的直齿轮驱动电机，电机采用地脚螺钉固定。
This article describes an effective method to set up the three-dimensional model for spur gear, helical gear by CAXA.
介绍了采用CAXA软件创建渐开线直齿轮、斜齿轮三维模型的有效方法。
c, Generally , with the same size, the torque of the Planetary Gear motor is bigger than Spur Gear motor.
同样尺寸的行星减速电机系列的电机力矩一般大于直齿减速电机。
The final drives are double reduction with spur gear and unitary sprocket, which are sealed by floating oil seal for easy service.
两级直齿轮减速，浮动油封密封，整体链轮。
Slipper Clutch Prevents damage to the spur gear and drivetrain during extreme driving.
拖鞋离合器，防止损害到齿轮传动和在极端的驾驶。
This paper deals with numerical simulation of cold forging forming of spur gear.
本文对圆柱直齿轮冷锻成形进行数值模拟分析。
Experiments with 6105QA diesel engine spur gear cover have shown that the method is effective.
对6105QA柴油机正时齿轮罩盖的实验表明了其正确性。
and it is indicates that the meshing stiffness of involute spur gear is independent of the gear's modulus.
指出渐开线直齿圆柱齿轮的啮合刚度与齿轮模数无关。
I plant developed by ladle spur gear transmission efficiency 97%(ordinary pot-round package for the 40%).
我厂开发的直齿轮浇包传动效率97%（普通的锅轮包为40%）。
Experimental results confirm that, it can achieve as high efficiency and accuracy as hobbing spur gear using the devised method.
在CNC滚齿机上的实切试验表明，该工艺可获得与直齿轮同等的齿形精度与加工效率。
Involute Spur Gear's main advantages and disadvantages, processing technology, we must pay attention to issues.
渐开线圆柱直齿齿轮的主要优缺点，加工中要注意的工艺性问题。
An Application of Finite Element Method on Bending Fatigue Strength Calculation of the Teeth of a Standard Straight Spur Gear
有限元法在标准直齿圆柱齿轮轮齿弯曲疲劳强度计算中的应用
Study of the transmission of two-side internal level gear and spur gear
双联内锥齿轮和圆柱齿轮传动研究
Numerical simulation and experimental study of the precision forging of spur gear
齿轮精锻的数值模拟与实验研究
Non-Newtonian Transient Elastohydrodynamic Lubrication Analysis of an Involute Spur Gear
渐开线直齿圆柱齿轮非牛顿瞬态弹流润滑分析
Compare the results of two methods of non- linear vibration of a spur gear pair
直齿轮副非线性振动分析中两种解法的结果比较
FEM numerical Simulation analysis for the cold closed upsetting-extrusion fluctuating forging of the spur gear
直齿圆柱齿轮浮动凹模冷闭式镦挤成形数值模拟分析
Nonlinear Dynamics of A Spur Gear Pair to Parametric and External Excitations
参外联合激励下直齿轮副的非线性动力学
Optimization of Tooth Form of Preform Die for Cold Precision Forging Process of Spur Gear
齿轮冷精锻工艺预锻模具齿形优化设计
A New Type of Finish Forging Die with an Energetics Mechanism with Backpressure for Spur Gear Blanks
有背压力能机构的新型圆柱齿轮坯精锻模
Numerical Simulation and Analysis of the Spur Gear Shaping under Different Modulus Conditions
不同模数下圆柱直齿轮成形的数值模拟及分析
The Spur Gear's Modeling with the Spinal Bend Feature and the Inverse Distortion Curve of Its Tooth Profile
骨架折弯进行直齿轮建模及其齿廓逆变形曲线
Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification
精密加工用正齿轮传动装置.适用范围.概念.测定参数.分类
The method for calculating the change spur-gear of a gear processing machine
齿轮加工机床的挂轮计算方法
Three Dimensional Rigid Plastic Finite Element Simulation of the Precision Forging of Spur Gear
直齿圆柱齿轮精锻过程的三维刚塑性有限元模拟
Modification of spur gear precision forging process using three-dimensional finite element analysis
直齿圆柱齿轮精锻成形工艺改进及模拟分析
Design of a Checking Tool for Over Ball Dimension of a Cylindrical Spur Gear
一种圆柱直齿轮跨棒距检具设计
New Method for Measuring Error of Tooth Form of Involute Spur Gear
渐开线圆柱直齿轮齿形误差测量新方法
The Numerical Analysis of Involute Spur Gear with Roughness on the Conformable Temperature Flow Surface
考虑粗糙表面特征等温弹流渐开线直齿齿轮的数值分析
Multilevel Technique for Lubrication Design of Involute Spur Gear Transmission
渐开线齿轮润滑设计的多重网格数值模拟技术
Design of Tooth Form of Die for Cold Precision Forging of Spur Gear
直齿圆柱齿轮冷精锻模具齿形设计
Analysis of Distribution Law of Dynamic Loadalong Meshing Line of Spur Gear Drive
齿轮传动动载荷沿啮合线分布规律的分析
Numerical simulation research on a new technological scheme for closed-die forging spur gear
齿轮闭式锻造新工艺方案的数值模拟研究
Study of Precision Extrusion's Technology for Spur Gear
直齿轮的精密挤压成形工艺研究
The Optimization for the Addendum Modification Coefficient of Spur Gear
直齿圆柱齿轮变位系数的优化选择
